40mm top-hung outward opening casement windows for bathrooms, kitchens, and staircase vents — where the full frame must open and compression sealing beats sliding on small openings. Use the calculator below for your exact size; typical installed price range ₹750–1,050/sq.ft before GST (glass, mesh, and multipoint hardware move the number).
For the full 40–72mm casement series guide (DGU limits, shutter widths, honest disadvantages), see the section before FAQs — or open top hung casement for detailed specs and photos.
This page prices 40mm top-hung / outward-opening casement — the standard openable type for wet areas and small vents. Calculator band: ₹750–1,050/sq.ft (before GST). Heavier glass, mesh, or multipoint locks push toward the top of the band.
Openings under 3 ft shutter width and 6–7 ft height — bathroom, kitchen platform vent, staircase — where you need full-frame opening and EPDM compression sealing. Wide balcony walls stay on 3-track sliding or system sliding.
Enter width × height, pick glass and mesh — get an instant ₹ estimate for 40mm top-hung casement. GST and site extras confirmed after inspection. For 50–52mm system casement BOQs, use system casement pricing.
Fill in your details to see the exact price and receive a detailed quote via email.
Profile: 40mm Casement Profile
Base Rate: Includes 6mm clear toughened glass, single point lock (handle type), friction stay
Hardware: Single point lock included. Multipoint lock automatically applied for 10mm, 12mm, DGU, and Laminated glass options
Optional Add-ons: Inside Aluminium 12mm Grills and Inside Openable Mesh available
Prices shown are based on current market rates for premium/medium range items
Rates may change due to inflation, market fluctuations, and material cost variations
Wastage percentage is not included in this calculator - actual prices may be higher
Final quotation will be provided after site inspection and exact measurements
GST extra as applicable
Default on this calculator — hinged at the top, opens outward from the bottom. Best for bathrooms and kitchens where rain-safe ventilation matters. Full product page: top hung casement.
Same 40mm profile family with side hinge — used where top-hung angle is not ideal. Pricing follows the same band if size and glass match.
2-track / 3-track / 4-track counts apply to sliding systems only. Casement uses hinges and friction stays — compare track types on sliding calculator hub if your opening is wide.
When you need 50–52mm depth, DGU up to 38mm, or entrance-door hardware, move to system casement or slim entrance door pages — not this 40mm budget calculator.
Captured in the base ₹/sqft curve — includes gaskets and standard powder finish. Wooden-finish coating adds per sqft in the calculator dropdown.
6mm toughened base. Upgrading to 10/12mm, DGU, or laminated increases glass cost and usually triggers multipoint hardware in the tool for proper support.
Friction stay (included) carries shutter weight. Multipoint lock lines appear when glass is heavy — better sealing and security on ground-floor vents.
Typical supply + install is in the installed price range; unusual heights, stone reveals, or tower lift access quoted separately after site check.
Opening is small (bath, kitchen, stair), you need full-frame vent, and swing space is clear. Casement seals better on dust and sound at the same size.
Balcony, living room, or any wall wider than ~6 ft where half-panel sliding beats multiple small casement vents. Start at sliding vs casement guide or 2-track sliding.
Budget Domal sliding can undercut casement on ₹/sqft — but on small wet-area vents, casement hardware cost is often worth the sealing gain. Compare both calculators with the same glass spec.
Not ideal for: wide balcony walls, floor-to-ceiling living glass — use system sliding series on those openings.
Casement (openable) systems have fewer profile series than sliding — but each one is engineered for a specific job. The full range: 40, 45, 50, 52, 65 and 72mm. Top hung, side swing, uplift doors and style doors are all built from this same section family, and so are entrance doors and French doors.
| Series | Max Height | Max Width/Shutter | Glass | Best For | Honest Limitation |
|---|---|---|---|---|---|
| 40–45mm | 6–7 ft | 3 ft | DGU up to 22mm | Flats, apartments, builder projects | Lightweight, low depth — keep shutters small |
| 50–52mm | 10 ft | Standard door widths | DGU up to 38mm | Premium homes, entrance doors | Higher cost |
| 65–72mm | 12 ft | 3.5–4 ft | Single 5–12mm / laminated up to 13.52mm only — no DGU | Offices, safety doors, automatic access | DGU not possible |
Related: top hung casement · system casement · slim entrance door · sliding vs casement
← Back to Aluminium Windows hub · Shower partitions (other category)